Intelligent Diagnostics
Advantages
– Bosch engine ECU: ME17,MED17,EDC17,MEVD17, etc.
– Siemens engine ECU: BMW(MSV90, MSD87, MSD85, MSD81, MSD80), Mercedes(SIM271DE2.0,SIM271KE2.0), VW/Audi(SIMOS8.6x,SIMOS8.5x,SIMOS8.4x), etc.
– Gearbox ECU: DQ200-MQB, DQ250XX, DL501 Gen1,VL381,VGS2- FCVT,VGS-FDCT,DQ400E,DL501 Gen2,DL382-7F,VGS2-FDCT,9G_Tronic,DQ380,DQ381, DQ500,AL551,AL450,AL552,AL951,8HPXX, etc.
X-431 IMMO PRO Tablet
Processor | 2.0GHz, Quad-Core |
Operation System | Android 10.0 |
Memory | 4GB |
Storage | 64GB |
Battery | 47.88Wh (7.6V,6300mAh) |
Display | 8′, 1280*800 |
Camera | Rear 8MP |
WIFI | 2.4GHz / 5GHz |
Interface | TYPE A *1 & TYPE C*1 |
Work Temperature | 0~50℃ |
Dimension | 234 x 166 x 39.5mm |
DBSCar VII
Working Voltage | DC 9 – 18V | |
Working Temperature | 0~50℃ | |
Communication | Bluetooth | |
Indicators | Power | ON: Connect to a vehicle |
Vehicle | Blink: When VCI is communicating with vehicle’s ECU | |
IO | Blue: Bluetooth communication between vehicle and VCI
Red: Wired USB communication between vehicle and VCI |
|
Dimension | 118.3 x 69.5 x 32 mm |
X-PROG3
Interface | DB26, DB15 |
Input Voltage | DC12V |
Input Current | 500mA |
Working Temperature | 0-50℃ |
Storage Temperature | -20-70℃ |
Vehicle Key Slot | To place car key for RF defection |
DB26 | Used to connect to each anti-theft cables |
Infrared Slot For Benz Key | Used to place the Mercedes-Benz infrared key to perform the key matching function |
Key IC Hole | Used to place the key chip to perform the key matching function |
Status Indicator | Power supply indicator lamp |
DIY Slot | Used to connect the anti-theft ECU pin through the cable to read and write data |
Locker | To tighten loose EEPROM board |
DC 12V | Used to connect to the DC12 power supply |
DB15 | To connect with vehicle’s DLC |
EEPROM Slot | To insert EEPROM board |
X431 IMMO Bosch/Simens Engine ECU EEPROM Data Backup and Restore
X431 X-PROG 3 TCU Clone for Audi A5